Item listed by Width (A), Length (B), and Material size & shape (C)

Thanks for your interest in our Topog-e Boiler Gaskets! We have hundreds of gaskets in stock and ready to ship to anywhere in the US, Canada, Mexico and other international locations. When ordering please be sure that each gasket matches your specifications. Note that the A and B dimensions are the measured from the inside of the gasket. Please check dimensions before ordering, restocking charges are 50% + freight!

Topog-E is the original molded rubber gasket for steam, water, or air use on boilers, water tanks, and air tanks that use pressures to 180 PSI and temperatures to 380 Deg. F. Topog-E gaskets conform to the topography of both surfaces to seal immediately. Each batch of rubber compound is rigidly laboratory tested for strength and endurance to exceed conditions under which a boiler must operate. For quick, accurate identification, the size and shape is permanently molded into each Topog-E gasket.

Key Benefits of Topog-E Boiler Inspection Gaskets

• Temperature to 380 Deg. F, Pressure to 180 PSI working pressure
• No seepage
• No corrosion
• Correct size easily determined

Measurements are inside width x inside length x material size & shape

Non-Warranty of Results: The Topog-E materials are sold for steam, water or air use only. Grease and solvents are destructive and should be avoided. Our recommendations for use of Topog-E gaskets are based on tests believed reliable. Since their installation and use is beyond our control we cannot guarantee the results, whether or not such use is in accordance with directions. WE disclaim any responsibility. Topog-E gasket company is located in Tulsa, OK